.338 Lapua Magnum 1-1/4" Triebel Full Length Sizing Die

Triebel Full-Length Sizing Die for Reloading

The full-length dies are used to size the cartridge case on full-length. In addition to a removable expander, our FL dies have an integrated primer ejector pin. All used spindles, the expander, and the ejector pin can be replaced easily, if necessary, with just little effort.

Sizing takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension.

The position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary.
You will find further instructions and assistance in selecting accessories and spare parts in the manual.

Click here for Bushing and Stem Info