Anschutz 1712 Silhouette Sporter Rifle 22lr
AnschutzAnschutz 1712 Silhouette Sporter Rifle 22lr
Hunting repeaters of the series 1700:
Anschutz target rifles are famous for their solid design , functionability and unsurpassed performance all around the world. The Anschutz match cylinder action which is also part of the ANSCHUTZ hunting repeaters dominates national, international, Olympic and world championship competitions in the small bore rifle disciplines. Buying such a hunting repeater does not only mean to acquire state-of-the-art technology but also a master piece in a class of its own.
Action:
The bolt with dual locking lugs is seated eccentrically in the receiver to give the action screws more support for better stock bedding. The bolt is cam cocking. Fast and trouble-free repeating is guaranteed by claw extractor and the additional cartridge holder with ejector. This precision makes ANSCHUTZ hunting repeaters a reliable partner in the field and in the forest. The receiver is equipped with an 11 mm (7/16") wide grooved receiver rail and is additionally drilled and tapped for scope mounts. The bolt face is recessed for full cartridge head support. An independent lateral bolt stop limits the travel of the bolt and thus protects the trigger as well.An additional gas escape groove guarantees safety.
Safety:
The sliding safety catch on the right hand side, a recent improvement, blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch
Trigger:
Two stage trigger and single stage trigger correspond to the match triggers of the ANSCHUTZ target rifle. The low-weight, hardened and finely polished triggers enable a fast and precise release of the trigger.
Barrel:
The barrels are manufactured using the same special process perfected for the ANSCHUTZ target rifles. The same attention to detail is given to the fitting of the receiver and the counterbore at the muzzle.
Monte Carlo stock:
Walnut stock with roll-over cheek piece, with fore-end schnabel tip, hand checkering at pistol grip and fore-end, black plastic butt plate and studs for sling swivel.
Item No.: 007594
Technical Data
- Name: 1712 Silhouette Sporter Walnut Monte Carlo
- Item No.: 007594
- Total length (cm): 104
- Weight approx. (kg):3.3
Trigger
- Name: 5109
- Item No.: 007692
- Model number: 5109
- Type: Two stage trigger
- min. Trigger weight (g): 800
- max. Trigger weight (g): 1100
- Trigger weight, adjusted (g): 1000
Barreled Action
- Name: Match 54
- Barrel: ANSCHUTZ Precision barrel
- Caliber: .22 l.r.
- Version: right
- Number of discharges: 8
- Muzzle diameter (mm): 18
- Magazine capacity: 5
- Barrel length (cm): 54.9
Stock
- Name: Monte Carlo
- Grip: Grip standard size
- Material: Walnut
- Butt plate: Rubber butt plate
- min. Length of pull (cm): 35
- max. Length of pull (cm): 37