Creedmoor Sports Cartridge Gauge Bell

Creedmoor Sports Cartridge Gauge Bell

This device by Creedmoor Sports is used as a companion tool with Cartridge Case Gauges such as those by L.E. Wilson or similar design. The tool utilizes a dial indicator (order separately) to primarily measure the changes to a case’s headspace relative to the rifle chamber and the sizing die.

You can use this tool to tell you the following measurements:

• How much your cases stretch during firing
• The amount of shoulder set back you are getting with your sizing die
• Changes in shoulder set back due to die adjustment
• Monitoring the consistency of your sizing process
• When equipped with a Primer Pocket Probe (Sold Separately) you can make quick measurements of primer pocket depth.

Includes:

• Creedmoor Sports Cartridge Gauge Bell
• Complete instructions
• Dial indicator sold separately
• E. Wilson Case Gauges or similar sold separately

Features:

• Stainless steel construction
• Minimize the amount of sizing and work hardening of your cases which will maximize their working life
• Proper use will ensure your cases will chamber smoothly
• Made in the U.S.A

Tech Tips:

• Insert clean fired case into L.E. Wilson case gauge (sold separately)
• Install dial indicator onto Gauge Bell (dial indicator sold separately)
• Place case gauge with case inserted on flat surface
• Place Gauge Bell over case gauge and read indicator reading (we like to zero our indicator at this step)
• Begin adjusting full length sizing die down and measuring until you see the dial indicator move .001” to .003” (this indicates how much the shoulder is being pushing back)
• Repeat process with a few cases to verify die setting