Creedmoor Sports Cartridge Gauge Bell
This device by Creedmoor Sports is used as a companion tool with Cartridge Case Gauges such as those by L.E. Wilson or similar design. The tool utilizes a dial indicator (order separately) to primarily measure the changes to a case’s headspace relative to the rifle chamber and the sizing die.
You can use this tool to tell you the following measurements:
- How much your cases stretch during firing
- The amount of shoulder set back you are getting with your sizing die
- Changes in shoulder set back due to die adjustment
- Monitoring the consistency of your sizing process
- When equipped with a Primer Pocket Probe (Sold Separately) you can make quick measurements of primer pocket depth.
Includes:
- Creedmoor Sports Cartridge Gauge Bell
- Complete instructions
- Dial indicator sold separately
- E. Wilson Case Gauges or similar sold separately
Features:
- Stainless steel construction
- Minimize the amount of sizing and work hardening of your cases which will maximize their working life
- Proper use will ensure your cases will chamber smoothly
- Made in the U.S.A
Tech Tips:
- Insert clean fired case into L.E. Wilson case gauge (sold separately)
- Install dial indicator onto Gauge Bell (dial indicator sold separately)
- Place case gauge with case inserted on flat surface
- Place Gauge Bell over case gauge and read indicator reading (we like to zero our indicator at this step)
- Begin adjusting full length sizing die down and measuring until you see the dial indicator move .001” to .003” (this indicates how much the shoulder is being pushing back)
- Repeat process with a few cases to verify die setting
